136 Find the inverse of a polynomial function

Two functions f and g are inverse functions if for every coordinate pair in f, (a, b), there exists a corresponding coordinate pair in the inverse function, g, (b, a). In other words, the coordinate pairs of the inverse functions have the input and output interchanged.

For a function to have an inverse function the function to create a new function that is one-to-one and would have an inverse function.

For example, suppose a water runoff collector is built in the shape of a parabolic trough as shown below. We can use the information in the figure to find the surface area of the water in the trough as a function of the depth of the water.

Diagram of a parabolic trough that is 18
Figure 2

Because it will be helpful to have an equation for the parabolic cross-sectional shape, we will impose a coordinate system at the cross section, with x measured horizontally and y measured vertically, with the origin at the vertex of the parabola.

Graph of a parabola.
Figure 3

From this we find an equation for the parabolic shape. We placed the origin at the vertex of the parabola, so we know the equation will have form [latex]y\left(x\right)=a{x}^{2}\\[/latex]. Our equation will need to pass through the point (6, 18), from which we can solve for the stretch factor a.

[latex]\begin{cases} 18=a{6}^{2}\hfill \\ a=\frac{18}{36}\hfill \\ \text{ }=\frac{1}{2}\hfill \end{cases}\\[/latex]

Our parabolic cross section has the equation

[latex]y\left(x\right)=\frac{1}{2}{x}^{2}\\[/latex]

We are interested in the surface area of the water, so we must determine the width at the top of the water as a function of the water depth. For any depth y the width will be given by 2x, so we need to solve the equation above for x and find the inverse function. However, notice that the original function is not one-to-one, and indeed, given any output there are two inputs that produce the same output, one positive and one negative.

To find an inverse, we can restrict our original function to a limited domain on which it is one-to-one. In this case, it makes sense to restrict ourselves to positive x values. On this domain, we can find an inverse by solving for the input variable:

[latex]\begin{cases}y=\frac{1}{2}{x}^{2}\hfill \\ 2y={x}^{2}\hfill \\ \text{ }x=\pm \sqrt{2y}\hfill \end{cases}\\[/latex]

This is not a function as written. We are limiting ourselves to positive x values, so we eliminate the negative solution, giving us the inverse function we’re looking for.

[latex]y=\frac{{x}^{2}}{2},\text{ }x>0\\[/latex]

Because x is the distance from the center of the parabola to either side, the entire width of the water at the top will be 2x. The trough is 3 feet (36 inches) long, so the surface area will then be:

[latex]\begin{cases}\text{Area} & =l\cdot w\hfill \\ \text{ } & =36\cdot 2x\hfill \\ \text{ } & =72x\hfill \\ \text{ } & =72\sqrt{2y}\hfill \end{cases}\\[/latex]

This example illustrates two important points:

  1. When finding the inverse of a quadratic, we have to limit ourselves to a domain on which the function is one-to-one.
  2. The inverse of a quadratic function is a square root function. Both are toolkit functions and different types of power functions.

Functions involving roots are often called radical functions. While it is not possible to find an inverse of most polynomial functions, some basic polynomials do have inverses. Such functions are called invertible functions, and we use the notation [latex]{f}^{-1}\left(x\right)\\[/latex].

Warning: [latex]{f}^{-1}\left(x\right)\\[/latex] is not the same as the reciprocal of the function [latex]f\left(x\right)\\[/latex]. This use of –1 is reserved to denote inverse functions. To denote the reciprocal of a function [latex]f\left(x\right)\\[/latex], we would need to write [latex]{\left(f\left(x\right)\right)}^{-1}=\frac{1}{f\left(x\right)}\\[/latex].

An important relationship between inverse functions is that they “undo” each other. If [latex]{f}^{-1}\\[/latex] is the inverse of a function f, then f is the inverse of the function [latex]{f}^{-1}\\[/latex]. In other words, whatever the function f does to x, [latex]{f}^{-1}\\[/latex] undoes it—and vice-versa. More formally, we write

[latex]{f}^{-1}\left(f\left(x\right)\right)=x,\text{for all }x\text{ in the domain of }f\\[/latex]

and

[latex]f\left({f}^{-1}\left(x\right)\right)=x,\text{for all }x\text{ in the domain of }{f}^{-1}\\[/latex]

A General Note: Verifying Two Functions Are Inverses of One Another

Two functions, f and g, are inverses of one another if for all x in the domain of and g.

[latex]g\left(f\left(x\right)\right)=f\left(g\left(x\right)\right)=x\\[/latex]

How To: Given a polynomial function, find the inverse of the function by restricting the domain in such a way that the new function is one-to-one.

  1. Replace [latex]f\left(x\right)\\[/latex] with y.
  2. Interchange x and y.
  3. Solve for y, and rename the function [latex]{f}^{-1}\left(x\right)\\[/latex].

Example 1: Verifying Inverse Functions

Show that [latex]f\left(x\right)=\frac{1}{x+1}\\[/latex] and [latex]{f}^{-1}\left(x\right)=\frac{1}{x}-1\\[/latex] are inverses, for [latex]x\ne 0,-1\\[/latex] .

Solution

We must show that [latex]{f}^{-1}\left(f\left(x\right)\right)=x\\[/latex] and [latex]f\left({f}^{-1}\left(x\right)\right)=x\\[/latex].

[latex]\begin{cases}{f}^{-1}\left(f\left(x\right)\right)={f}^{-1}\left(\frac{1}{x+1}\right)\hfill \\ \text{ }=\frac{1}{\frac{1}{x+1}}-1\hfill \\ \text{ }=\left(x+1\right)-1\hfill \\ \text{ }=x\hfill \\ f\left({f}^{-1}\left(x\right)\right)=f\left(\frac{1}{x}-1\right)\hfill \\ \text{ }=\frac{1}{\left(\frac{1}{x}-1\right)+1}\hfill \\ \text{ }=\frac{1}{\frac{1}{x}}\hfill \\ \text{ }=x\hfill \end{cases}\\[/latex]

Therefore, [latex]f\left(x\right)=\frac{1}{x+1}\\[/latex] and [latex]{f}^{-1}\left(x\right)=\frac{1}{x}-1\\[/latex] are inverses.

Try It 1

Show that [latex]f\left(x\right)=\frac{x+5}{3}\\[/latex] and [latex]{f}^{-1}\left(x\right)=3x - 5\\[/latex] are inverses.

Solution

Example 2: Finding the Inverse of a Cubic Function

Find the inverse of the function [latex]f\left(x\right)=5{x}^{3}+1\\[/latex].

Solution

This is a transformation of the basic cubic toolkit function, and based on our knowledge of that function, we know it is one-to-one. Solving for the inverse by solving for x.

[latex]\begin{cases}\text{ }y=5{x}^{3}+1\hfill \\ \text{ }x=5{y}^{3}+1\hfill \\ \text{ }x - 1=5{y}^{3}\hfill \\ \text{ }\frac{x - 1}{5}={y}^{3}\hfill \\ {f}^{-1}\left(x\right)=\sqrt[3]{\frac{x - 1}{5}}\hfill \end{cases}\\[/latex]

Analysis of the Solution

Look at the graph of f and [latex]{f}^{-1}\\[/latex]. Notice that the two graphs are symmetrical about the line [latex]y=x\\[/latex]. This is always the case when graphing a function and its inverse function.

Also, since the method involved interchanging x and y, notice corresponding points. If [latex]\left(a,b\right)\\[/latex] is on the graph of f, then [latex]\left(b,a\right)\\[/latex] is on the graph of [latex]{f}^{-1}\\[/latex]. Since [latex]\left(0,1\right)\\[/latex] is on the graph of f, then [latex]\left(1,0\right)\\[/latex] is on the graph of [latex]{f}^{-1}\\[/latex]. Similarly, since [latex]\left(1,6\right)\\[/latex] is on the graph of f, then [latex]\left(6,1\right)\\[/latex] is on the graph of [latex]{f}^{-1}\\[/latex].

Graph of f(x)=5x^3+1 and its inverse, f^(-1)(x)=3sqrt((x-1)/(5)).
Figure 4

Try It 2

Find the inverse function of [latex]f\left(x\right)=\sqrt[3]{x+4}\\[/latex].

Solution

License

Icon for the Creative Commons Attribution 4.0 International License

College Algebra Copyright © by Lumen Learning is licensed under a Creative Commons Attribution 4.0 International License, except where otherwise noted.

Share This Book